Shape: Screw-shaped.
Dimensions: M10 x 22 mm.
Sensing distance: 2 mm.
Resolution: 1 μm.
High-accuracy Detection of Metal Workpiece Displacement.
Sensor Heads support a wide variety of applications.
such as SUS and aluminum, using the material selection function.
Simple linearity compensation (teaching).
Easily perform calculation for two Sensors by using a Calculating Unit.
Prevent mutual interference for up to five Units by using a Calculating Unit.
E32-D36T type: special beam type; liquid level detection,
Features: no restrictions on the diameter of the pipe is not easy to be affected by bubbles and water droplets,
Bending radius (mm): R4.
Fiber element for meeting diversified needsSize: M30, Non-shielded.
Sensing distance: 30.0 mm
Connection: M12 connector ZX-EM02T.
Body material: Brass.
Thread length (overall length): 66 (80).
Output configuration: PNP
ZX-EM02T
Operation mode NC.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels) ZX-EM02T.
Modular construction simplifies customization. Detection mode: diffuse reflection type.
Connection: socket type (M12).
Detection distance: infrared 100mm.
Output mode: PNP output. Appearance: Shielded, M18.
Sensing distance: 4 mm.
Output configuration: DC 2-wire, (1)-(4) pin arrangement.
Model: Operation mode, NO.
Chip-immune Inductive.
Proximity Sensor ZX-EM02T.
Correct operation even with aluminum or iron chips sticking,
to the Sensor.
Only the sensing object is detected.
Pre-wired Smartclick Connector Models also available. E3F3-T81 detection methods: the firing pattern,
Wire lead out type,
Type: Plastic appearance; PNP output,
Threaded cylindrical photoelectric sensor, built-in amplifier,
Photoelectric sensor with proximity sensor appearance
High anti interference with optoelectronic -IC technologyProduct name: Liquid Leakage Point Sensor.
Main material: Polyethylene.
Cable material: Outer sheath: PVC Inner sheath: Fluoroplastic.
Electrode material: SUS304 and fluoroplastic coating.
A New Liquid Leakage Point Sensor Has Been Added,
to the K7L Series. Fluoroplastic Coating oon the,
Bottom Electrode Ensures Chemical Resistance ZX-EM02T.
Can be used in conjunction with Sensing Bands.
Stud screw mounting requires no tools for installation.
No tools means the Sensor can be wiped clean quickly and easily.
The optional Mounting Bracket enables faster installation than three-screw,
mounting ZX-EM02T.
Connect multiple Sensors to one K7L Amplifier for significant cost savings.