OMRON
Home >> Download >> OMRON >> Manual Download >> D4N-4E22 INSTRUCTION sheet ()

D4N-4E22 INSTRUCTION sheet ()

Brand: OMRON
Product model: D4N-4E22
Name: safety limit switch
Sort: INSTRUCTION sheet
File language: English
File size: 0.61MB
Actuator: One-way roller arm lever (vertical).
Conduit size: 1-conduit; Pg13.5.
Built-in switch mechanism: 3NC (Slow-action).
Popular Safety Limit Switches.
Providing a Full Lineup Conforming to,
International Standards.
Lineup includes models with 1NC/1NO, 2NC, 2NC/1NO and,
3NC contact forms D4N-4E22 INSTRUCTION sheet.
(Slow-action models with MBB contacts are available.)
M12-connector models are also available, saving on labor and,
simplifying replacement D4N-4E22
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads.
Conforms to EN115-1, EN81-1, and EN81-2 (slow-action models only).
Certified standards: UL, EN (TÜV), and CCC. Specifications: Outputs; NPN (- common); 16 points D4N-4E22 INSTRUCTION sheet.
I/O connections: M3 Screw terminals.
Rated internal circuit power supply voltage:
Supplied from the communications connector.
Rated I/O power supply voltage: 24 VDC.
Allows I/O Expansion with Transistor Terminals.
Wide variety of data, such as maintenance system data,
can be collected without affecting the productivity,
of the control system.
Valuable information can be collected,
and managed through the network, including information,
on the communications power supply D4N-4E22 INSTRUCTION sheet.
voltage levels, Unit wear and tear,
and equipment operating information.
Expansion via Expansion I/O Units.
With no communications baud rate settings,
required and detachable terminal blocks,
maintenance is easier. Ratings: Standard load; 5 A at 250 VAC, 4 A at 30 VDC.
Cable: VCTF oil-resistant cable *1.
Actuator: Crossroller plunger.
Cable length : 3 m.
Compact Limit Switch That''s Also.
Thin and Highly Sealed.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.)
Sealing characteristics that meet IEC IP67 degree of protection.
Triple-sealed construction:
Plunger section sealed via nitrile rubber packing seal and,
diaphragm; switch section sealed via nitrile rubber cap;
cable entrance sealed via encapsulating material.
CCable lengths of 3 and 5 m available on standard models D4N-4E22 Manual.
Models also available with UL and CSA-certified cables.
Multiple mounting possible with Switches with Plungers.
Models with red LED indicators added to series for easy,
connfirmation of operation D4N-4E22 Manual.
(Set by default to light for non-operation.)
VCTF oil-resistant cables with CE marking.
(Applicable only to standard models.)
Related products
OMRON
Pull-reset Safety Limit Switch
D4N-6A32R
OMRON Pull-reset Safety Limit Switch D4N-6A32R
Actuator: Roller plunger. Conduit size: 2-co
OMRON
Safety Limit Switch
D4N-4D62
OMRON Safety Limit Switch D4N-4D62
Actuator: One-way roller arm lever horizonta
OMRON
Pull-reset Safety Limit Switch
D4N-4B2GR
OMRON Pull-reset Safety Limit Switch D4N-4B2GR
Actuator: Adjustale roller lever, form lock
OMRON
Safety Limit Switch
D4N-8A20
OMRON Safety Limit Switch D4N-8A20
Actuator: Roller lever resin lever, resin ro