D4N-9B32 INSTRUCTION sheet ()

Actuator: Roller lever (resin lever, resin roller).
Conduit size: 2-conduit; G1/2.
Built-in switch mechanism: 2NC (Slow-action).
Popular Safety Limit Switches.
Providing a Full Lineup Conforming to,
International Standards.
Lineup includes models with 1NC/1NO, 2NC, 2NC/1NO and,
3NC contact forms D4N-9B32 INSTRUCTION sheet.
(Slow-action models with MBB contacts are available.)
M12-connector models are also available, saving on labor and,
simplifying replacement D4N-9B32
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads.
Conforms to EN115-1, EN81-1, and EN81-2 (slow-action models only).
Certified standards: UL, EN (TÜV), and CCC. Slim and Compact Switch with Better D4N-9B32 INSTRUCTION sheet.
Seal and Ensuring Longer Service.
Life than D4E.
Flat springs with an improved lever ratio of the built-in.
switch ensure smooth snap action and long life expectancy.
Protection cover protects the built-in switch from dust and oil.
Plunger incorporates a tough seal cap that lasts for a long time.
One touch connector eliminates need for tedious wiring,
operations and reduces downtime for wiring and,
maintenance (models with standard, easy-to-use screw,
terminals are also available) D4N-9B32 INSTRUCTION sheet.
Minute load model with gold cladding is optimal for,
electronic control.
Molded terminal types as well as molded terminal types,
with operating indicator lamps are available for screw,
terminal systems.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for Information on,
approved models.).
No difference in mounting pitch and characteristics,
between D4E-@N and D4E models. Actuator: Plunger.
Conduit size: 1-conduit; G1/2.
Built-in switch mechanism: 1NC/1NO (Slow-action).
A Series of Pull-reset Models Now.
Available.
Lineup includes three contact models wiith 2NC/1NO and 3NC,
contact forms in addition to the previous contact forms 1NC/1NO and 2NC D4N-9B32 Manual.
M12-connector models are available, saving on labor and,
simplifying replacement.
Standardized gold-clad contacts provide high contact reliability D4N-9B32 Manual.
Can be used with both standard loads and microloads.
Conforms to EN115, EN81-1 and EN81-2.
Certified standards: UL, EN (TÜV), and CCC.