CP1E-N30DR-D PROGRAMMING MANUAL (Hardware)

C500-GP Special I/O Unit GPIB Interface Unit C500-GPI01.Specification: Platinum resistance thermometer input (Pt, JPt),
ON/OFF or advanced PID control,
tran-sistor (PNP) output, 2 loops.I/O capacity: 512 pts (2, 048 max. with remote I/O).
Execution time: Basic: 0.15 µs min.Special: 0.6 µs min CP1E-N30DR-D PROGRAMMING MANUAL.
C1000H-SL SYSMAC BUS SYSMAC LINK C1000H-SLK21-V1.Size: 35mm CP1E-N30DR-D
Type: 4 lines.
Lighting voltage: DC24V.
Color: blue.
Large tactile buttons and uniform lighting to create a general space.
Backlight brings a uniform, elegant and pleasant lighting.
Large tactile buttons are easier to touch.
Drive rod mechanism to keep the direction of the parallel button, even if the pressure on the side of the CP1E-N30DR-D PROGRAMMING MANUAL.
Damping mechanism to ensure high impact resistance.
A slim body with a thickness of 14.6 mm. I/O bits: 5, 120 (Expan-sion Racks: 7).
Program capacity: 30K steps.
Data memory capacity: 64K words (DM: 32K words, EM: 32K words ×1 banks).Product name: CJ2H (Built-in EtherNet/IP) CPU Units.
Specifications: I/O capacity/Mountable Units(Expansion Racks),
2,560 points/40 Units(3 Expansion Racks max CP1E-N30DR-D PROGRAMMING MANUAL. ) ;
Program capacity, 250K steps; Data memory capacity,
512K words(DM: 32K words, EM: 32K words × 15 banks);
LD nstructio execution time, 0.016 μs.
Current consumption(A): 5V,0.82(See note.); 24v, --.
Standards: UC1, N, L, CE.
CJ2H for high speed, high capacity.
The CJ2H Series is ideal for advanced machine.
automation needs such as those required in image.
processing inspection of electrical components and,
high speed sorting on conveyors. SYSMAC LINK Units can be powered up two units in one unit.
One cable included with feeder.Model: C200HW-BI101-V1.
No. of I/O slots: 10 slots.Unit type: CS-series Special I/O Units.
Product name: Analog Input Units.
Specifications: I/O points, 16 inputs;
Signal range selection,
Set separately for each input;
Signal range, 1 to 5 V, 0 to 5 V,
0 to 10 V, -10 V to 10 V, 4 to 20 mA;
Resolution, 1/8,000 (Settable to 1/4,000);
Conversion speed, 250 s/point max CP1E-N30DR-D Manual.
(Settable to 1 ms/point).
Externa connection, MIL connector.
Current consumption: 5V, 0.15A; 26V, 0.06A.
Standards: UC1, CE.
For Various Analog I/Os.
Anaalog Input Units for converting,
analog input signals into binary data CP1E-N30DR-D Manual.
Analog Output Units for converting ,
binary data into analog output signals.