CP1E-N40DT1-D PROGRAMMING MANUAL (Hardware)

Name: Three-tier Screw Terminal Block.
Specifications: Inputs; 16 inputs; PNP;
With Short-circuit and,
Disconnected Line Detection.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system CP1E-N40DT1-D PROGRAMMING MANUAL.
A wide variety of CompoNet Slave Units,
contribute to system size reduction CP1E-N40DT1-D
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. I/O points: 256 pts.
Program capacity(words): 7 CP1E-N40DT1-D PROGRAMMING MANUAL. 2 K.
DM capacity (words): 6 K.
RS-232C port: YES.The initial configuration of the G language unit in the industry due to the use of G language,
Complex processing procedures do not need to be able to make the ladder diagram.
The realization of the first 1 axis simultaneous control of 4 axis simultaneous control in the industry is due to the multi task function,
Can be executed at the same time or the 2 axis simultaneous control of 4 axes, and then can achieve the 4 axis independent control, etc CP1E-N40DT1-D PROGRAMMING MANUAL.
Up to 8 units can be installed CVM1 8 units can be installed 1 units, can control up to 32 axes.
Applicable to ABS encoder by standard,
Applicable to the ABS type (absolute output) encoder, so after the emergency stop, no need to search for the origin, etc..
S curve also according to the standard configuration plus deceleration curve, in addition to the trapezoidal outside,
Also configured to suppress the mechanical vibration of the S shape curve.
Program login maximum of up to 100
G language can be programmed with the MC support software GName: CS1D CPU Unit for Single CPU Systems.
Specifications: Number of I/O ppoints,
960 points (2 Racks);
Program capacity, 10 Ksteps;
Data Memory, 64 Kwords(DM: 32 Kwords,
EM: 32 Kwords×1 bank);
LD execution time, 0 CP1E-N40DT1-D Manual. 04 μs;
Duplex CPUs, --;
Interrupt functions, OK.
Current consumption: 5V sysstem, 0 CP1E-N40DT1-D Manual. 78A;
26V system, --.
Standards: UC1, N, L, CE.
Redundant CPU Units , Power Supply Units ,
Communications Units ,
and Expansion I/O Cables.