CRT1-ID16S REFERENCE MANUAL ()

Model: C200H-OC222N.
No. of points: 12 pts.
Specifications: 2A, 250VAC/24VDC(For resistive loads).For 3-slot Backplane.CV500-RM SYSMAC BUS Remote I/O Master Unit (optical) CV500-RM211.
Light type.Name: PID Control Module.
Model: C200H-PID02.
Output: Voltage output.Model : CV1000-CPU01-EV1.
SFC / Ladder 1, 024 points (with RAM62K words, the top internal link) CRT1-ID16S REFERENCE MANUAL. Model: C200H-ME432 CRT1-ID16S
Description: EEPROM, 4K words, battery back-up.with clock(CPU21, CPU23 only).C500-ID Special I/O Unit ID Sensor Unit For the C500-IDS22 C500-IDA22.Unit type: CS1 Special I/O Units.
Product name: Isolated-type,
Pulse Input Unit.
Input points : 4 pulse inputs.
Externa connection: Removable erminal block.
No. of unit numbers allocated: 1 CRT1-ID16S REFERENCE MANUAL.
Current consumption: 5V, 0.20A; 26V, 0.16A.
Standards: UC1, CE.
Provides the functionality of isolators,
power supplies, signal converters,
and other devices.
The Analog Input Unit converts analog,
input signals such as 1 to 5 V or 4 to 20mA,
into digital values, and takes the values,
scaled in industrial units, and transfers,
it to the CPU Unit as the process value CRT1-ID16S REFERENCE MANUAL.
Because of this, no ladder program is required,
at the CPU Unit for scaling.
The Analog Output Unit converts analog output set,
values from the CPU Unit to analog output signals,
such as 4 to 20 mA or 1 to 5 V, and outputs them.
The built-in functions, such as measurement value,
alarms, rate-of-change calculations, and square roots,
have enabled major savings in cost and space compared,
with previous systems.
High-resolution Models and 8-point Input Models are,
also available.
By combining the Units, logging/monitoring.
systems can be constructed,
or the Units can be used together with LCBs/LCUs,
to construct complete process control systems CRT1-ID16S Manual.
Parameters can be easily displayed and set in an,
easy-to-understand form without special tools. Model: C500-CN531.
Cable length: 50 m.
Programming Console Connecting Cable.
For extension andd connection of FIT of FIT CRT1-ID16S Manual.
Number of outputs: 32 pts.
Max. switch-ing capacity: 0.5 A at 24 V DC.
External connector: Connector.
Weight: 210 g max.