CS1G-CPU44H Installation Guide ()

Model : CVM1D-CPU21.
For duplex system requires two.Model: C200H-OD217.
No. of points: 12 pts.
Specifications: 5 to 24 VDC. source type (PNP).C200HW Backplane PLATE ALPHA CPU ADAPTOR C200HW-AB001C200HW Communications Interface Module C200HW-PRM21Model: C200H-ID211.
No. of inputs: 8 pts.
Input voltage: 12 to 24 VDC, +10%/–15% CS1G-CPU44H Installation Guide.
Input current: 10mA, 24VDC.
Isolation: Photo-coupler CS1G-CPU44H
Indica-tor: LED.
External connec-tions: Remove-able termi-nal blocks.
Inputs percom-mon: 8 pts.
Internal currentcon-sump-tion: 10mI/O bits: 960 (Expan-sion Racks: 2).
Program capacity: 20K steps.
Data memory capacity: 64K words (DM: 32K words, EM: 32K words ×1 bank)Number of outputs: 6 pts.
Max. switch-ing capacity: 0 CS1G-CPU44H Installation Guide. 4 A at 100 to 240 V AC.
External connector: Terminal block.
Weight: 240 g max.Model : CVM1D-DPL01.
Simplex system also required.Model: C200HW-COM03-V1.
Specifications: One RS-422/485 port.The unit comes with coaxial type.Name: MIL Connectors.
Specifications: Outputs; 32 outputs ; NPN; --.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet CS1G-CPU44H Installation Guide.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. C200HS-CPU31-E CPU
High-Performance CIM Version, Built-in RS-232C Port
The C200HS-CPU31-E and C200HS-CPU33-E controller offers the same basic functionality as the C200HS-CPU01-E/CPU03 controllers CS1G-CPU44H Manual.
This CPU may be used ineither SYSMAC NET and/or SYSMAC LINK communication systems.
The built-in RS-232C port supports the same communications as the C200HS-CPU21/CPU23.Conttrol method: Semiclosed loop with automatic trapezoid or S-curve acceleration/deceleration CS1G-CPU44H Manual.
Control output signals: Analog.
Controlled axes: 2 axes max.