CQM1H-CPU51 CPU

I/O points: 256 pts.
Program capacity(words): 7.2 K.
DM capacity (words): 6 K.
RS-232C port: YES.
Pulse I/O: YES.I/O points: 256 pts.
Program capacity(words): 7.2 K.
DM capacity (words): 6 K.
RS-232C port: YES.
ABS interface: Yes.Specifications: 4 Kwords with clock.Number of analog inputs: 4 inputs CQM1H-CPU51.
Number of analog outputs: 2 outputs.
Input signal ranges: –10 to 10 V, 0 to 10 V, 0 to 5 V CQM1H-CPU51
Output signal ranges: –10 to 10 V.I/O points: 256 pts.
Program capacity(words): 7.2 K.
DM capacity (words): 6 K.
RS-232C port: YES.
Analog setting: YES.Specifications: 8 Kwords without clock.Specification: Thermocouple input (K, J, L, T, R, S, B),
heater burnout alarm,
ON/OFF or advanced PID control,
manual operation,
transistor (NPN) output, 2 loops CQM1H-CPU51. Analog inputs: 4 points.Number of outputs: 16 pts.
Max. switch-ing capacity: 50 mA at 4.5 V DC to 300 mA at 26.4 V.
External connector: Terminal block.
Weight: 180 g max.Applicable CPU Units: CQM1H-CPU51/61.
Mounting locations/No. of Boards: One in Inner Board slot 2 (right slot).
Pulse inputs: 4 inputs.
Pulse outputs: 2 outputs CQM1H-CPU51.
Dimensions: 25 × 110 × 107 mm (W × H × D).
Weight: 90 g max.
Expands G730 input capacity of G730 remote master;
adds 32 or 16 inputs,
DIP switch selected.Supply voltage: 24 V DC.
Operating voltage range: 20 to 28 V DC.
Output capacity: 30 W 5 V DC: 6 A.Description : Connects peripheral port to RS232C computer port (Use with CS1W-CN114).Number of outputs: 8 pts.
Max. switch-ing capacity: 0.4 A at 100 to 240 V AC.
External connector: Terminal block.
Weight: 240 g max.Analog outputs : 2 pooints CQM1H-CPU51.
Power supply : built-in power supply
Ranges : -10 to + 10V or 0 to 20mADescription : Connects peripheral port to D-sub 9pin connector.
Must be used with CS1W-CN114 (3.3m).Number of inputs: 8 pts.
Input Voltage: 100 to 120V DC CQM1H-CPU51.
Input Current: 5 mA.CQM1-LK Special I/O Unit I/O LINK MODULE SYSBUS CQM1LK501.Emergency stop unit: 2 inputs/2 outputs, 4 general-purpose inputs.