CQM1H-ME16R EPROM Memory Cassette

Number of outputs: 16 pts.
Max. switch-ing capacity: 50 mA at 4.5 V DC to 300 mA at 26.4 V.
External connector: Terminal block.
Weight: 210 g max.Specification: Thermocouple input (K, J, L, T, R, S, B),
heater burnout alarm,
ON/OFF or advanced PID control,
manual operation,
transistor (PNP) output, 2 loops CQM1H-ME16R. Supply voltage: 100 to 240 V AC, 50/60 Hz (wide range).
Operating voltage range: 85 to 265 V AC CQM1H-ME16R
Output capacity: 5 V DC: 3.6 A(18 W).Number of outputs: 32 pts.
Max. switch-ing capacity: 16 mA at 4.5 V DC to 100 mA at 26.4 V.
External connector: Connector.
Weight: 180 g max.Number of inputs: 32 pts.
Input Voltage: 24V DC.
Input Current: 6 mA.Applicable CPU Units: CQM1H-CPU51/61 CQM1H-ME16R.
Mounting locations/No. of Boards: One in Inner Board slot 2 (right slot).
Pulse inputs: 4 inputs.
Pulse outputs: 2 outputs.
Dimensions: 25 × 110 × 107 mm (W × H × D).
Weight: 90 g max.
I/O points: 256 pts.
Program capacity(words): 7.2 K.
DM capacity (words): 6 K.
RS-232C port: YES.
Analog setting: YES.Specifications: Without clock (see below).One of the following connection cables is required for ladder programming CQM1H-ME16R. Specifications: 4 Kwords with clock.Specification: Thermocouple input (K, J, L, T, R, S, B),
heater burnout alarm,
ON/OFF or advanced PID control,
manual operation,
transistor (NPN) output, 2 loops.Applicable CPU Units: CQM1H-CPU51/61.
Pulse inputs: 4 inputs.
External outputs: 4 outputS.
Current consumption (Supplied from Power Supply Unit): 5 V DC, 400 mA max.
Dimensions: 25 × 110 × 107 mm (W × H × D).
Weight: 90 g max.
Number of outputs: 8 pts.
Max. switch-ing capacity: 1.0 A at 24 V DC.
External connector: Terminal block.
Weight: 240 g max.Number of outputs: 6 pts.
Max. switch-inng capacity: 0 CQM1H-ME16R. 4 A at 100 to 240 V AC.
External connector: Terminal block.
Weight: 240 g max.Connecting I/O control module and interface module.
Cable length: 0.3 m.Required for Analog Input and Output Units: For two Analog Units.Speciification: Thermocouple input (K, J, L, T, R, S, B),
ON/OFF or advanced PID control,
manual op-eration,
transistor (NPN) output, 4 loops CQM1H-ME16R.