Home
>> Products
>> OMRON
>> Power/other peripheral devices
>> Power / equipment protection equipment
>> Protective equipment for equipment
>> K2CM-2HAV Motor Protective Relay
K2CM-2HAV Motor Protective Relay
OMRON K2CM-2HAV Manual And Instructions
K2CM-2HAV datasheetPDF datasheet
K2CM-2HAV Communications Manual
OMRON K2CM-2HAV Product information and technical parameters：
Brand: OMRON
Name: Motor Protective Relay
Model: K2CM-2HAV
Time specification: Inverse type.
Current setting range: 50 to 160 A.
Operating voltage: 200/220/240 VAC.
Resetting method: Automatic.
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase.
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operation time,
is indicated from the start of operation.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, and load conditions. Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
...More relevant models >>>>
K2CM-2HAV datasheetPDF datasheet
K2CM-2HAV Communications Manual
OMRON K2CM-2HAV Product information and technical parameters：
Brand: OMRON
Name: Motor Protective Relay
Model: K2CM-2HAV
Time specification: Inverse type.
Current setting range: 50 to 160 A.
Operating voltage: 200/220/240 VAC.
Resetting method: Automatic.
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase.
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operation time,
is indicated from the start of operation.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, and load conditions. Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
Appearance: insert type.
Control supply voltage: DC24V.
Action elements: overload detection.
Action characteristic: anti time limit action type.
Especially suitable for single phase motor over current protection.
Can be used for motor overload protection, common single-phase circuit of the AC current detection K2CM-2HAV.
A variety of models, such as anti time limit characteristics, lock time, instantaneous action, etc K2CM-2HAV, are provided,
The product is rich in variety, and can be effectively protected, detected and controlled according to the actual situation.
When the current is large, the input resistance of the CT or the relay part is not needed, and the use is simple.
Because it is a plug-in, installation, disassembly, wiring and other operations are very simple K2CM-2HAV. Type: S8JC-ZS series models list.
Meet the criteria: CE (EN50178).
Configuration: power supply with cover; bottom surface mounting.
Input voltage: 50W.
Output voltage: 5VDC.
Output current: 10.0A.
Economic type power supply S8JC-Z additional models,
The new power S8JC-ZS has a CE certification mark to market.
Product features: reduce material costs;
Export machinery to be used to meet specific safety standards;
Through the DIN guide rail installation, significant savings in time K2CM-2HAV. Mounting method: Flange-mounting.
Pin shape: Solder cup pin.
Applicable wire diameter: AWG22 to 28.
DC: Model.
Minimum order: 50.
Water- and Environment-resistive FA.
Connectors Save Wiring and Maintenance Effort.
Compact FA connectors meet IP67 requirements and ensure a,
94V-0 fire retardant rating.
A wide array of connectors makes a wiring system more modular,
simplifies maintenance, and reduces downtime.
Connectors with Cables and Connector Assemblies are available.
Three types of Connector Assembly: Crimping, soldering, and screw-on.
Connectors with Cables are UL certified.
Based on IEC61076-2-101 (IEC60947-5-2) and NECA 4202. Power supply voltage: 24 VDC *1.
Current consumption: 900 mA max. (input from included AC adapter).
Discharge voltage: ±7 kV.
Discharge method: Variable DC.
Airflow (m3/min.): 1.4 to 2.3 m3/min (typical).
Ionization time *2: 1.2 s (0.8 s with no Filter).
Ion balance *2: ±10 V max.
Amount of generated ozone: 0.01 ppm max.
(measured at a distance of 50 mm from air outlet).
Indicators: High-voltage output lamp: ION (yellow),
Cleaning lamp: CLEANING (orange), Power lamp: POWER (green).
Main functions: Automatic ion balance adjustment, airflow adjustment,
manual ion balance adjustment.
Ambient temperature range: Operating and storage: 0 to 50°C.
(with no icing or condensation).
Ambient humidity range: Operating: 35% to 65%,
storage: 35% to 85% (with no condensation).
Weight (packed state): Approx. 2.0 kg.
Materials: Unit: ABS, Discharger: Tungsten, staand: SPCC K2CM-2HAV.
Accessories: Instruction sheet, AC adapter, warning labels (2 types),
FG connection cable (2 m).
High-speed, High cost performance.
Ionization.
High-speed ionization in only 0.8 seconds.
Built-in sensor controls the ion baalance at all times K2CM-2HAV.
Fully open structure makes it possible to perform.
maintenance simply and safely.
Can easily be attached to aluminum profiles.
Control supply voltage: DC24V.
Action elements: overload detection.
Action characteristic: anti time limit action type.
Especially suitable for single phase motor over current protection.
Can be used for motor overload protection, common single-phase circuit of the AC current detection K2CM-2HAV.
A variety of models, such as anti time limit characteristics, lock time, instantaneous action, etc K2CM-2HAV, are provided,
The product is rich in variety, and can be effectively protected, detected and controlled according to the actual situation.
When the current is large, the input resistance of the CT or the relay part is not needed, and the use is simple.
Because it is a plug-in, installation, disassembly, wiring and other operations are very simple K2CM-2HAV. Type: S8JC-ZS series models list.
Meet the criteria: CE (EN50178).
Configuration: power supply with cover; bottom surface mounting.
Input voltage: 50W.
Output voltage: 5VDC.
Output current: 10.0A.
Economic type power supply S8JC-Z additional models,
The new power S8JC-ZS has a CE certification mark to market.
Product features: reduce material costs;
Export machinery to be used to meet specific safety standards;
Through the DIN guide rail installation, significant savings in time K2CM-2HAV. Mounting method: Flange-mounting.
Pin shape: Solder cup pin.
Applicable wire diameter: AWG22 to 28.
DC: Model.
Minimum order: 50.
Water- and Environment-resistive FA.
Connectors Save Wiring and Maintenance Effort.
Compact FA connectors meet IP67 requirements and ensure a,
94V-0 fire retardant rating.
A wide array of connectors makes a wiring system more modular,
simplifies maintenance, and reduces downtime.
Connectors with Cables and Connector Assemblies are available.
Three types of Connector Assembly: Crimping, soldering, and screw-on.
Connectors with Cables are UL certified.
Based on IEC61076-2-101 (IEC60947-5-2) and NECA 4202. Power supply voltage: 24 VDC *1.
Current consumption: 900 mA max. (input from included AC adapter).
Discharge voltage: ±7 kV.
Discharge method: Variable DC.
Airflow (m3/min.): 1.4 to 2.3 m3/min (typical).
Ionization time *2: 1.2 s (0.8 s with no Filter).
Ion balance *2: ±10 V max.
Amount of generated ozone: 0.01 ppm max.
(measured at a distance of 50 mm from air outlet).
Indicators: High-voltage output lamp: ION (yellow),
Cleaning lamp: CLEANING (orange), Power lamp: POWER (green).
Main functions: Automatic ion balance adjustment, airflow adjustment,
manual ion balance adjustment.
Ambient temperature range: Operating and storage: 0 to 50°C.
(with no icing or condensation).
Ambient humidity range: Operating: 35% to 65%,
storage: 35% to 85% (with no condensation).
Weight (packed state): Approx. 2.0 kg.
Materials: Unit: ABS, Discharger: Tungsten, staand: SPCC K2CM-2HAV.
Accessories: Instruction sheet, AC adapter, warning labels (2 types),
FG connection cable (2 m).
High-speed, High cost performance.
Ionization.
High-speed ionization in only 0.8 seconds.
Built-in sensor controls the ion baalance at all times K2CM-2HAV.
Fully open structure makes it possible to perform.
maintenance simply and safely.
Can easily be attached to aluminum profiles.
...More relevant models >>>>
Last one: 
next one: Related download