SRT2-OD08-1 Transistor Remote I/O Terminals

OMRON Transistor Remote I/O TerminalsSRT2-OD08-1

SRT2-OD08-1 Introduce | SRT2-OD08-1 Catalog / Manual / Instructions / Software download

OMRON SRT2-OD08-1 Manual And Instructions
SRT2-OD08-1 datasheetPDF datasheet
SRT2-OD08-1 SETUP MANUAL

OMRON SRT2-OD08-1 Product information and technical parameters：
Brand: OMRON
Name: Transistor Remote I/O Terminals
Model: SRT2-OD08-1
I/O classification: Output.
Internal I/O circuit common: PNP (+ common).
I/O points: 8.
Rated voltage: 24 VDC.
I/O rated voltage: 24 VDC.
Long-distance Communications Supported by SRT2 Models,
(Long-distance/High-speed Communications Selection).
Ultra-compact at 80 x 48 x 50 (W x H x D) mm for,
4-point and 8-point terminals and 105 x 48 x 50,
(W x H x D) mm for 16-point terminals.
Two independent power supplies can be used,
because the I/O terminals are insulated from the internal circuits.
DIN track mounting and screw mounting are both supported.

Name: e-CON Connectors.
Specifications: Inputs; 16 inputs; NPN;
With Short-circuit and,
Disconnected Line Detection.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system SRT2-OD08-1.
A wide variety of CompoNet Slave Units,
contribute to system size reduction SRT2-OD08-1
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. Unit: Terminal block model.
I/O classification: Digital input SRT2-OD08-1.
Internal I/O common: PNP (- common).
I/O points: 16.
I/O connections: M3 terminal board.
Power supplyvoltage: 24 VDC.
I/O specification: DC/transistor.
Digital I/O Units Compatible with MULTIPLE I/O TERMINAL,
Terminal block, connector, and high-density connector,
models are available.
The circuit block of the terminal block model can be,
mounted or dismounted for ease of maintenance without,
disconnecting the wires SRT2-OD08-1.
DIN track mounting. Unit: Connector model.
I/O classification: Digital output.
Internal I/O common: PNP (+ common).
I/O points: 16.
I/O connections: Fujitsu connector.
Power supplyvoltage: 24 VDC.
I/O specification: 0.5 A, DC/transistor.
Digital I/O Units Compatible with MULTIPLE I/O TERMINAL,
Terminal block, connector, and high-density connector,
models are available.
The circuit block of the terminal block model can be,
mounted or dismounted for ease of maintenance without,
disconnecting the wires.
DIN track mounting. Unit: High-density connector model.
I/O classification: Digital input.
Internal I/O common: PNP (- common).
I/O points: 32.
I/O conneections: Fujitsu connector SRT2-OD08-1.
Power supplyvoltage: 24 VDC.
I/O specification: DC/transistor.
Digital I/O Units Compatible with MULTIPLE I/O TERMINAL,
Terminal block, connector, and high-density connector,
models are available.
The ciircuit block of the terminal block model can be,
mounted or dismounted for ease of maintenance without,
disconnecting the wires SRT2-OD08-1.
DIN track mounting.

...More relevant models >>>>