Home
>> Products
>> OMRON
>> Energy saving/Environmental protection testing equipment
>> EQUO environmental sensor
>> ZN-THX11-SA Next-Generation Production Environment Sensors
ZN-THX11-SA Next-Generation Production Environment Sensors
OMRON ZN-THX11-SA Manual And Instructions
ZN-THX11-SA datasheetPDF datasheet
ZN-THX11-SA Manual
ZN-THX11-SA Manual
ZN-THX11-SA User's Manual
OMRON ZN-THX11-SA Product information and technical parameters：
Brand: OMRON
Name: Next-Generation Production Environment Sensors
Model: ZN-THX11-SA
Sensor that can be connected: Thermo-Humidity Sensor Head (ZN-THS1__-S).
Display: LCD 7-segment 5-digit 2-step display,
auxiliary information indicator display.
Measurement interval: 10 s, 20 s, 30 s, 1 min, 2 min,
5 min, 10 min, 20 min, 30 min, 1 h.
Calculation function: Instantaneous value, maximum value,
minimum value, average value.
Operating mode: Normal mode, sleep mode.
Recording mode: Continue, ring.
Alarm signal output: Output to photocoupler (External power supply: 12 to 24 VDC,
Load current: Max. 45 mA) Alarm hold setting is possible.
Internal storage device: Internal memory: Approx. 8,500 data items.
External storage device: SD card (to save measured values and to save/read set, values),Recommended SD card: HMC-SD291 (manufactured by OMRON).
Power supply voltage: DC input: 24 VDC±10%, Battery: 2 AAA batteries.
Battery life: Approx. 1 year∗6 (sleep mode, measurement interval of 10 minutes, with 2 AAA nickel metal hydride batteries, with SD card not inserted).
Operating temperature range: 0 to 60°C.
Operating humidity range: 20 to 85% (no condensation).
Weight (packaged): Approx. 500 g.
Accessories: Instruction Sheet, Startup Guide CD-ROM∗7,
Alarm output connector∗8, DC cable (straight type).
Easy temperature and humidity control with an SD Card.
...More relevant models >>>>
ZN-THX11-SA datasheetPDF datasheet
ZN-THX11-SA Manual
ZN-THX11-SA Manual
ZN-THX11-SA User's Manual
OMRON ZN-THX11-SA Product information and technical parameters：
Brand: OMRON
Name: Next-Generation Production Environment Sensors
Model: ZN-THX11-SA
Sensor that can be connected: Thermo-Humidity Sensor Head (ZN-THS1__-S).
Display: LCD 7-segment 5-digit 2-step display,
auxiliary information indicator display.
Measurement interval: 10 s, 20 s, 30 s, 1 min, 2 min,
5 min, 10 min, 20 min, 30 min, 1 h.
Calculation function: Instantaneous value, maximum value,
minimum value, average value.
Operating mode: Normal mode, sleep mode.
Recording mode: Continue, ring.
Alarm signal output: Output to photocoupler (External power supply: 12 to 24 VDC,
Load current: Max. 45 mA) Alarm hold setting is possible.
Internal storage device: Internal memory: Approx. 8,500 data items.
External storage device: SD card (to save measured values and to save/read set, values),Recommended SD card: HMC-SD291 (manufactured by OMRON).
Power supply voltage: DC input: 24 VDC±10%, Battery: 2 AAA batteries.
Battery life: Approx. 1 year∗6 (sleep mode, measurement interval of 10 minutes, with 2 AAA nickel metal hydride batteries, with SD card not inserted).
Operating temperature range: 0 to 60°C.
Operating humidity range: 20 to 85% (no condensation).
Weight (packaged): Approx. 500 g.
Accessories: Instruction Sheet, Startup Guide CD-ROM∗7,
Alarm output connector∗8, DC cable (straight type).
Easy temperature and humidity control with an SD Card.
Easy temperature and humidity control with an SD Card. Application: 410 × 410 mm.
Power supply: 24 VDC.
The ZN series is even thinner and,
sports improved air volume.
These products enable cleaning that,
is both fast and flexible.
Three sizes are available to match various sizes of clean booths ZN-THX11-SA. Rated primary current: 50 A.
Rated secondary current: Special output.
Installation: Installed separately ZN-THX11-SA
High-performance Power Monitor Suitable for On-panel Mounting and Display.
Assists Energy-saving Analysis.
Energy classification for wasted standby and stopped power.
(Classification based on external inputs is also supported.)
Power and current can be measured simultaneously.
Measurement of flow rates with a pulse conversion function ZN-THX11-SA.
Simple temperature measurements with Temperature Sensor included in the Unit.
High-precision Measurements.
Measurement of generated power (regenerative power),
leading reactive power, lagging reactive power, and consumed power.
Power measurements on the primary side of inverters,
which are widely used to save energy.
Automatic range switching for accurate measurement of standby and stopped power ZN-THX11-SA.
Energy-saving Functions.
Conversion to monetary cost. (Also used for classified standby and stopped power.)
Alarm outputs can be selected for active power, reactive power,
regenerative power, current, voltage, or power factor.
The Power Monitor can log measurement data and supports Modbus communications.
Installation and Settings.
Direct measurement of three-phase, four-wire, 400-V line voltage.
Simple measurements without voltage wiring.
Incorrect voltage wiring detection. Application: 250 × 250 mm.
Power supply: Supplied from the Air Clean Unit.
The ZN series is even thiinner and,
sports improved air volume ZN-THX11-SA.
These products enable cleaning that,
is both fast and flexible.
Three sizes are available to match various sizes of clean booths. Air purification unit.
Apply: 410mm.
Power specifications: DC24VV ZN-THX11-SA.
The more thin, more large wind ZN series flexible and quickly realize the cleaning.
Can be based on the size of the clean room selection of 3 sizes.
Power supply: 24 VDC.
The ZN series is even thinner and,
sports improved air volume.
These products enable cleaning that,
is both fast and flexible.
Three sizes are available to match various sizes of clean booths ZN-THX11-SA. Rated primary current: 50 A.
Rated secondary current: Special output.
Installation: Installed separately ZN-THX11-SA
High-performance Power Monitor Suitable for On-panel Mounting and Display.
Assists Energy-saving Analysis.
Energy classification for wasted standby and stopped power.
(Classification based on external inputs is also supported.)
Power and current can be measured simultaneously.
Measurement of flow rates with a pulse conversion function ZN-THX11-SA.
Simple temperature measurements with Temperature Sensor included in the Unit.
High-precision Measurements.
Measurement of generated power (regenerative power),
leading reactive power, lagging reactive power, and consumed power.
Power measurements on the primary side of inverters,
which are widely used to save energy.
Automatic range switching for accurate measurement of standby and stopped power ZN-THX11-SA.
Energy-saving Functions.
Conversion to monetary cost. (Also used for classified standby and stopped power.)
Alarm outputs can be selected for active power, reactive power,
regenerative power, current, voltage, or power factor.
The Power Monitor can log measurement data and supports Modbus communications.
Installation and Settings.
Direct measurement of three-phase, four-wire, 400-V line voltage.
Simple measurements without voltage wiring.
Incorrect voltage wiring detection. Application: 250 × 250 mm.
Power supply: Supplied from the Air Clean Unit.
The ZN series is even thiinner and,
sports improved air volume ZN-THX11-SA.
These products enable cleaning that,
is both fast and flexible.
Three sizes are available to match various sizes of clean booths. Air purification unit.
Apply: 410mm.
Power specifications: DC24VV ZN-THX11-SA.
The more thin, more large wind ZN series flexible and quickly realize the cleaning.
Can be based on the size of the clean room selection of 3 sizes.
...More relevant models >>>>
Last one: OMRON Next-Generation Production Environment Sensors ZN-THS17C-S 
next one: OMRON Thermo-Humidity Station ZN-THX21-S Series
Related download