CS1G-CPU44-V1 REFERENCE MANUAL (Communications Commands)

NO. OF I/O SLOTS: 10 SLOTSModel: C200H-IA222V.
No. of inputs: 16 pts.
Input voltage: 200 to 240 VAC, +10%/–15%.
Input current: 10mA, 200VAC.
Isolation: Photo-coupler.
Indica-tor: LED.
External connec-tions: Remove-able termi-nal blocks.
Inputs percom-mon: 16 pts.
Internal currentcon-sump-tiPeripheral port to RS-422 conversion cable (length: 0 CS1G-CPU44-V1 REFERENCE MANUAL. 2 m).Output method: Analog resolution: 1/6000 CS1G-CPU44-V1
Analog Inputs: 2.
Analog Outputs: 1.Required for Analog Input and Output Units: For two Analog Units.CPU Unit: CP1H-XA CPU Units.
Specifications: CPU type, Memory capacity: 20K steps
High-speed counters: 100 kHz, 4 axes Pulse outputs:
100 kHz, 2 axes (Models with transistor outputs only);
Analog inputs: 4, Analog outputs: 2;
Power supply, DC power supply; Output method, Transistor output (sinking);
Inputs, 24; Output, 16 CS1G-CPU44-V1 REFERENCE MANUAL.
Standards: UC1, N, L, CE.
4 Axis Position Control and Comprehensive Programmable Controller.
The CP1H-X with pulse outputs for 4 axes.
The CP1H-Y with 1-MHz pulse I/O.
The CP1H-XA with pulse outputs for 4 axes and built-in analog I/O. Name: Compact Connectors.
Specifications: Inputs/Outputs; 1 input/1 output; NPN CS1G-CPU44-V1 REFERENCE MANUAL.
Bit slave of smallest class in industry,
Innovation in wiring for any type of machinery.
Available in 2 types: 2-point Bit Slave Unit,
and 4-point Bit Slave Unit.
Compact size for installation in limited space.
Save space and wiring since bit slave can be,
installed near I/O devices.
Industry first bit slave connectable with round,
cables which can be easily purchased at a lower price.
Connectable with flat cables, too for easy wiring.
Cables are selectable depending on applications. Model: C200H-B7A12.
I/O points: 32 input points or 30 input points and 2 error inputs.
Weight: 300g max.Power supply: AC power supply.
Output method: Transistor output source type.
Inputs points: 12 points.
Outputs points: 8 points.Unit classification: CJ1 Special I/O Units.
name: Position control unit.
Specifications; Control method/Control,
output interface:Open-loop control by pulse,
train output/Line-driver output;
Number of control axes : 4 axes.
No. of unit numbers allocated: 2.
Currennt consumption: 5V, 0 CS1G-CPU44-V1 Manual. 36A; 24V, --.
Standards: UC1, CE.
High-speed, High-precision positioning,
with 1, 2, or 4 axes.
Versatile functions and superb performance,
enable the construction of compact,
high-performance machiines CS1G-CPU44-V1 Manual.
With its ultra-compact size of 31 × 90mm (W×H),
this highly space-efficient Position Control Unit,
(PCU) enables up to 4 axes of motor control.