CS1H-CPU65-V1 REFERENCE MANUAL (Communications Commands)

Model: C500-CE401.
Solder pin connector cover 40PName: Compact Connectors.
Specifications: Outputs; 4 outputs; PNP.
Bit slave of smallest class in industry,
Innovation in wiring for any type of machinery.
Available in 2 types: 2-point Bit Slave Unit,
and 4-point Bit Slave Unit.
Compact size for installation in limited space CS1H-CPU65-V1 REFERENCE MANUAL.
Save space and wiring since bit slave can be,
installed near I/O devices CS1H-CPU65-V1
Industry first bit slave connectable with round,
cables which can be easily purchased at a lower price.
Connectable with flat cables, too for easy wiring.
Cables are selectable depending on applications. Model: C200H-ME431.
Description: EEPROM, 4K words, no clock.Expands G730 input capacity of G730 remote master;
adds 32 or 16 inputs,
DIP switch selected CS1H-CPU65-V1 REFERENCE MANUAL. Model: CPM2C-16ET1M. Units with transistor outputs only.
1 MIL connector.
Outputs: 16 outputs.
Input type: 24 VDC.
Output type: sourcing transistor.Accessory Battery C500-BAT08(3G2A5-BAT08)Product name: NA-type CPU Units with 20 I/O Points (Built-inanalog).
Specifications: Power Supply, 24 VDC; Inputs,
12(Built-inanalog inputs: 2; Outputs, 8(Built-inanalog outputs: 1;
Output type: Transistor (sinking) CS1H-CPU65-V1 REFERENCE MANUAL.
Program capacity: 8K steps.
memory Data capacity: 8K words.
External powersupply(24 VDC): --.
Current consumption: 5 V, 0.23A; 24 V，0.09A.
Standards: UC1, N, L, CE.
The CP1E Programmable Controller: Economical, Easy to use, and Efficient.
The E@@(S)-type Basic CPU Units provide cost,
performance and easy application with only basic functionality.
The N@@(S@) and NA-types Application CPU Units,
support Programmable Terminal connection, position control,
and inverter connection. Unit type: CJ1 CPU Bus Units.
Product Name: Position Control,
Units with EtherCAT interface.
Specifications: Control output interface,
Control commands executed by,
EtherCAT communications.
Positioning functions: Memory operation,
Direct operation by ladder programming;
No. of axes: 4 axes.
No. of unit numbers allocaated: 1 CS1H-CPU65-V1 Manual.
Current consumption : 5V, 0.46A; 24V,--.
Standards: UC1, CE.
Preeminent control performance and,
easy operation feature of EtherCAT,
improve the production efficiency.
The EtherCAT communications with,
100Mbps bbaud rate enables fast,
and accurate position control CS1H-CPU65-V1 Manual.
A wide range of position control,
functions are available with,
this position control unit.