DRT1-ID32ML-1 OPERATION MANUAL ()

Actuator: Adjustable roller lever, form lock (metal lever, rubber roller).
Conduit size: 1-conduit; Pg13.5.
Built-in switch mechanism: 2NC/1NO MBB (Slow-action).
Popular Safety Limit Switches.
Providing a Full Lineup Conforming to,
International Standards.
Lineup includes models with 1NC/1NO, 2NC, 2NC/1NO and,
3NC contact forms DRT1-ID32ML-1 OPERATION MANUAL.
(Slow-action models with MBB contacts are available DRT1-ID32ML-1)
M12-connector models are also available, saving on labor and,
simplifying replacement.
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads.
Conforms to EN115-1, EN81-1, and EN81-2 (slow-action models only).
Certified standards: UL, EN (TÜV), and CCC DRT1-ID32ML-1 OPERATION MANUAL. Specifications: Inputs;
NPN (+ common);
16 points.
I/O connections: MIL connector(Connector with 10-cm cable).
Rated internal circuit power supply voltage:
Supplied from the communications connector.
Rated I/O power supply voltage: 24 VDC.
Very Compact 16-/32-point Remote Terminals.
Used in combination with Interface,
Conversion Boards (e.g., D-Sub) to,
connect to a wide range of interfaces DRT1-ID32ML-1 OPERATION MANUAL.
35 x 60 x 80 mm (W x D x H). Actuator: Adjustable roller lever, form lock (metal lever, resin roller).
Conduit size: 1-conduit; M20.
Built-in switch mechanism: 2NC (Slow-action).
Popular Safety Limit Switches.
Providing a Full Lineup Conforming to,
International Standards.
Lineup includes models with 1NC/1NO, 2NC, 2NC/1NO and,
3NC contact forms.
(Slow-action models with MBB contacts are available.)
M12-connector models are also available, saving on labor and,
simplifying replacement.
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads.
Conforms to EN115-1, EN81-1, and EN81-2 (slow-action models only).
Certified standards: UL, EN (TÜV), and CCC. Output configuration: NPN open collector (- common).
Contact form: SPST-NO.
Operation indicator: ON when operated.
Cable length: 1 m.
Optical System Achieves 1-μm Operating Position.
Repeatability in this 4-way Switch.
No-contact struucture for high reliability DRT1-ID32ML-1 Manual.
Ceramic materials in measuring part for superior resistance to abrasion.
Two different output types (PNP and NPN) available. ,
Less abrasion and damage of mechanical contacts compared,
to switchees with contacts, reducing fluctuation in the output DRT1-ID32ML-1 Manual.
More compact than previous OMRON models: 40% less mass,
15% lighter across the operating width.